SSMC 10kA/50A-2/1–LP-S-Ex Solid State Mitigation Cell
SSMC is a robust polarization cell designed to divert induced AC current to the ground. The internal impedance of the Cell is so large for DC current up to a preset DC voltage and almost short circuit for AC current which makes it possible to bypass the AC current to ground while not affecting the Cathodic protection current of the structure.
The Cell switches on for any voltage present on the protected Structure which is 2.0 V negative or 1.0V positive with respect to ground and switches off if the voltage of the pipeline is between these limits, providing overvoltage protection for the pipeline up to the fault current ratings.
The Cell does not require any maintenance, can be used in any mounting position and under any whether conditions because of its sealed structure.
Download Manual
Please fill out the following form to get your download link.
Download Datasheet
Technical Specifications
| Atex Data | Zone 2, Zone 22, T5 (IEP 20 ATEX 0829x) |
| Continuous AC Current | 50A |
| AC Fault Current (0.1sec) | 17kA |
| AC Fault Current (0.6sec) | 10kA |
| Operating Temperature | -20/+50ºC |
| Ingress Protection | IP65 |
| Forward Pol. Threshold Voltage | 2,0 VDC |
| Reverse Pol. Threshold Voltage | 1,0 VDC |
| Lifetime (40ºC) | > 15 Years (> 30 Y. Opt.) |
| Warranty | 2 Years |
| Lightning Protection | 100kA (10/350 s) |
| Internal Impedance (50Hz) | 0.015 ohm |
| Leakage Current | < 15mA |
AC Fault Current Ratings (Amperes RMS)
| Cycles | 50 Hz | 60 Hz |
| 1 | 25,5 kA | 26,5 kA |
| 3 | 20 kA | 21 kA |
| 5 | 17 kA | 18,5 kA |
| 10 | 16 kA | 17 kA |
| 20 | 13,5 kA | 14,5 kA |
| 30 | 10 kA | 11 kA |