
UTS-1 Universal Wire Drive and Control PCB
- Can be used with any MIG/MAG Machine
- 24V or 42V, AC or DC Supply Voltage
- Constant Voltage or Encoder Feedback control
- Motor current compensation
- Motor current limiting
- 24V or 42V Motors can be connected
- Adjustable Burn-Back
- Adjustable Soft Start
- Wire inching
- Gas purge
- 2 or 4 trigger operations
UTS-1 is a Wire Drive and Control PCB designed for general purpose use. UTS-1 can precisely adjust the wire drive speed thanks to its digital structure and multiple feedback options. The UTS-1 offers many functions with compact dimensions. (W 72mm x L 107mm x H 40mm )
Wide Supply Voltage Range: UTS-1 has a switching power supply on board which makes it possible to be powered from 24 or 42 V systems, no need to care about AC or DC
Motor Selection: 24 or 42V motors can be connected to UTS-1. The adjustment can be made by simply placing the provided jumper to the correct location.
Burn-Back and Soft Start: The adjustment dials on UTS-1 provides burn-back and Soft start parameters to be adjusted.
2 or 4Trigger Operations: UTS-1 can easly be commanded to operate in either stat-stop or memorized trigger modes.
Constant Voltage or Encoder Feedback Control: UTS-1 can operate in either I-R compansated Constant Voltage Feedback mode or Encoder Feedback Mode.
In I-R compansated Constant Voltage Feedback mode the motor voltage is kept constant while compansating for the motor I-R drops, In Encoder Feed-back Control the speed reference is taken from the encoder output of the motor. Which provides the most precise speed control.