• Single push button demagnetization
• Special Automatic kick back mode
• Robust carrying case

Modes

• Automatic Mode (without sensor): In this mode, the device functions without a sensor or remote command. Demagnetization is started by winding the cables to pipe and pressing “Start” button.
• Manuel Mode (with sensor): In this mode, demagnetization is held by manuel current adjustment using the adjustment button on remote control command.
• Automatic Mode (with sensor): In this mode, before starting to weld, ZeroSensor is put to the weld point. The device will provide demagnetization automatically. After demagnetization, the sensor is removed and you can start welding.

Remote Control Command Features

• Polarity change
• Mode adjustment
• Current adjustment button
• Magnetic flux sensor with display and special weld joint sensor
• Start/stop button and state indicators

Included

• 3 phase electrical supply cable
• Remote Control
• Magnetic Flux Sensor
• Two connection cables (10 meter each)
• Junction lead (2 meter)
• Durable hard carrying case
• Cable carrying bag